Welcome to Domotique-fibaro

 

Inscrivez-vous maintenant pour accéder à toutes nos fonctionnalités. Une fois inscrit et connecté, vous serez en mesure de contribuer à ce site en soumettant votre propre contenu ou en répondant au contenu existant. Vous serez en mesure de personnaliser votre profil, de recevoir des points de réputation comme une récompense pour la soumission de contenu, tout en communiquant avec d'autres membres via votre boîte de réception privée, et bien plus encore! Ce message sera supprimé une fois que vous vous êtes connecté.

 

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Rechercher dans la communauté: Affichage des résultats pour les étiquettes 'Mise à jour'.



Plus d’options de recherche

  • Rechercher par étiquettes

    Saisir les étiquettes en les séparant par une virgule.
  • Rechercher par auteur

Type du contenu


Forums

  • Bienvenue
    • Annonces et suggestions
    • Nouveau ? Présentez-vous
    • Le bistrot
    • Mon installation domotique
    • Autres Solutions Domotiques
  • La HC2 et ses périphériques
    • La Home Center pour les nuls
    • Home Center 2 & Lite
    • Modules Fibaro
    • Modules Z-wave
    • Périphériques et matériels autres
    • Plugins
    • Alarme & Vidéo-surveillance
    • Multimédia
    • Chauffage et Energie
    • Actionneurs & Ouvrants (Portail, volets...)
    • Eclairage
    • Applications Smartphones et Tablettes
    • English Section
  • Fibaro's Awards
    • Membre du mois
    • Jeux concours & Cadeaux
  • Les bonnes affaires
    • Sites internet
    • Petites annonces

Calendriers

Aucun résultat à afficher.


93 résultats trouvés

  1. Version 4.100 - Stable This update features migration process from version 3.600, reconfiguring every device, adjusting it for changes which took place in the system. This will assure a possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please, refer to the message that appears in the interface and Notification Center for further instructions after finishing upgrade. Important! Updating from version 3.600 may take up to 30 minutes, please do not restart controller during update process. Resolved issues: - Charts in Consumption Panel are not aligned. - Firmware Update changelog is not displayed sometimes. - Lack of translations in Diagnostic Panel. - Magic Scene featuring removed device is inoperable. - Magic Scene triggered by battery level is not working. - floating point numbers are not displayed correctly on Virtual Devices labels. - Some special characters in Magic Scene name may preclude them from saving. - Occasional 503 error after activating Virtual Device buttons. - Alarm Panel is blank if no devices are added. - Lack of parameters templates for languages different than English and Polish. - After several requests sent from Virtual Device no more requests are sent (e.g. when controlling Global Cache). - Device can not be disarmed from scene. New devices support: - Enerwave ZWN SC7 version 1.5. - Leviton VRCZ4 version 0.2. - Aspier RF 5 Scene Controller. - RFID Readers: BeNext, Wintop, Zipato. - FGKF-601. - FGCD-001. - FGWP-102. - Sensative Strip versions: 0.0, 0.4, 0.5. - Vision Security Wirelees, Siren VISEZM1601 versions: 15.5, 15.10. - Remotec Technology Ltd, Remotec ZXT120 version 1.2. - Poly control, Danalock versions: 1.2, 1.4. - Philio Technology Corp, Philio Tech PAN11 versions: 1.1, 1.2. - GreenWave, PowerNode, versions: 4.20, 4.28. Other improvements: - Multiple RGBW devices can be grouped and controlled as one (both with interface and physical switches). Integration is possible in Advanced Configuration of one of RGBW Controllers. - After adding Dimmer, Relay Switch, Wallplug, Roller Shutter or RGBW Controller user can choose controlled device type with pop-up. - Removing device with cross icon from device tile triggers Z-Wave removing process, with possibility of forcing it. - Improved scene information, number of running instances and scene triggered information are displayed on bottom of scene tile. - Update availability is checked on Home Center booting. - Rooms without devices assigned are displayed in Home, Scenes and Devices tab. - RGBW color can now be set in Magic Scenes. - New filters for displaying hidden devices on Devices tab. - Power management notifications are now visible in Notification Center, for devices that are capable of sending them. e.g. Fibaro Dimmer 2, Fibaro Switch 2. - Z-Wave chip malfunction notification is displayed in Notification Center in case of such event. - New action in Magic Scenes, controlling of lights or roller shutters in rooms. - Undesired interface caching effect was reduced significantly. Change is applied once cache is cleared.
  2. Voici un périphérique virtuel qui a pour utilité de détecter et de notifier un utilisateur lorsqu’une nouvelle mise à jour est disponible en téléchargement pour le HC2 de Fibaro. (Publié sur le blog de Pascal le 21-03-2014) Version 1.0.8 – Mise à jour : 13/01/2015 Vous pouvez télécharger la dernière version ici et sur le blog consulter la notice d'installation et d'utilisation bien que tout soit simplifié au maximum Version 1.0.8 – Mise à jour : 13/01/2015 (Pour HC2 >= V4.031) Aucunes configuration nécessaire dorénavant, il faut importer le vd et c'est tout. Compatible API REST de la V4 L'unique paramétrage restant à faire par l'utilisateur est de préciser dans le code (dans le mainloop) l' ID du smartphone et de l' utilisateur pour les notifications. local userID = 2; local smartphoneID = 844; Version 1.0.6 – Mise à jour : 08/09/2014 (Pour HC2 <= V3.600) L'image principale du Virtual Device réapparaît maintenant automatiquement après l'appui sur un bouton Notification de mise à jour disponible sur la home du périphérique virtual. Remise en forme et révision du code Version 1.0.5 – Mise à jour : 04/09/2014 Amélioration: Récupération automatique de la variable en cas de données corrompues (suggéré par Lazer) Mise à jour des traductions Version 1.0.4 – Mise à jour : 03/09/2014 Nouveau: Affichage du numéro de version dans l'interface utilisateur et ajouté à la notification (mail & push) Nouveau: Icône d'un membre du forum domotique-fibaro.fr, merci Lazer Amélioration: Envoyer une notification si une nouvelle mise à jour est détectée et ne pas répéter les envois. Corrections mineures. Version 1.0.2 – Mise à jour : 21/02/2014 Corrections mineures.Version 1.0.1 – Mise à jour : 14/02/2014 Installation automatisée pour faciliter la mise en place des variables globales et du paramétrage de l’application. Possibilité de choisir le type de notification avec un bouton à trois états depuis l’interface graphique: Email, Push ou les deux. Possibilité de choisir le type de mise à jour devant être notifié avec un bouton à trois états depuis l’interface graphique : Bêta, stable ou les deux. Multilingue : Français, Anglais. Téléchargements: UpdateNotifier_v1.0.6.zip pour HC2 en V3.xxx UpdateNotifier_1.0.8.zip pour HC2 en V4.xxx
  3. Mise à jour

    LA nouvelle version stable est sortie il y a quelque minutes. Software Changes List 4.090: Version 4.090 This update features migration process from version 3.600, reconfiguring every device, adjusting it for changes which took place in the system. This will assure possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please refer to message that appears in interface and Notification Center after finishing upgrade for further instructions. Important! Updating from version 3.600 may take longer than usual, up to 30 minutes, please do not restart controller during update process. Resolved issues: - #0003578 Danfoss thermostat shows unreal value - #0003883 No reports from Northq Gas Meter NQ-92021 - Update progress bar stops on 30% - Virtual Device code works after device deletion - Satel sensors do not report lastBreached value - #0003605 #0003962 #0003962 Weather is not updating (weather information provider changed to yr.no) - Trigger information is brought back to the way it operated in 4.080 - #0003094 Alarm panel doesn't record change of alarm state - #0003958 Virtual Device main loop hangs - #0003303 Remote Gateway synchronization moves devices to Unassigned - Protection Command Class not working on devices without template - 503 error when deleting section in some cases - Malfunction of RGBW when changing controlled device to RGB - NaN displayed in device serial number - Scene Activation not working when triggered multiple times by the same id - Mobile applications: Change of devices order not possible for non-admin users - Philips Hue plugin does not allow new user configuration. Reinstall existing plugin to enable fix - Wind speed available in weather conditions computed incorrectly - value too low - Services Restart called from 503 error page not working - Multiple Virtual Devices working simultaneously may cause 503 error - Virtual Devices hang - Scenes do not trigger when RAM usage is above 75%. Threshold moved to 90% - Device hierarchy not displaying properly for Dimmer 2 in advanced configuration - FIBARO Swipe imported by Gateway Connection not working properly - Z-Wave Weather templates lacking for devices of other manufacturers New devices support: - #0003488 Aeon Labs Multisensor GEN 5 - #0003244 Zwave.me Keyfob GEN 5 - MCO MH10 PM2.5 Monitor - MCO MH9 CO2 Monitor - Aspire RF9518 - Aspire RF9534 - Aspire RF9536 - Leviton VRI06-1L - Leviton VRI10-1L - Leviton VRE06-1L - Leviton VRF01-1L - Leviton VRS15-1L - Leviton VRS05-1L - Leviton VRCS2-MR - Leviton VRCS4-MR - Leviton VRCZ4-MR - Leviton VRCZ4-MO - Leviton VRCS1-1L - Leviton VRCZ1-1L - Vitrum Think Simple IV Scenari - Secure SWM301 Other improvements: - Battery devices now work on default wake up interval when included - Serial number is now displayed in advanced configuration of devices that declare it - Setpoint thermostats capabilities are flexibly adapted when device is included - Added support for Fibaro Button - #0003844 Confirmation pop-up is now displayed when restoring or deleting backup - Favicon added - Satus bar is scrolled with page - Notification Center is available directly on the status bar - Firmware Update - wireless update of Z-Wave devices: Motion Sensor, Dimmer and Wall Plug. Availability of update for each device is showed in Notification Center and Advanced Configuration. Run update only when devices is in close range from controller (ca. 2 m). Process can take up to 30 minutes, depending on Z-Wave traffic and devices queued for update. Details on whole procedure can be found in notification displayed before every device update. - #0001660, 0003525 Shutdown and reboot actions available from Lua scene, more information can be found on developer.fibaro.com - New, configurable scenes triggering modes available in each scene advanced configuration: Automatic - scene gets triggered either by one of defined triggers (device state, global variable etc.) or manually, by 'Run' button Manual - scene executes only manually by 'Run' button Disabled - scene is inactive, does not get triggered and cannot be run manually Visibility - scene can be hidden in all interfaces (mobile apps, web interface) In connection to this change there are new Lua API functions, more information can be found on developer.fibaro.com - Other minor fixes
  4. Bonjour Suite à la mise à jour, j'ai relevé au repos ( en désactivant mes quelques scripts ) une consommation de data sur le web relativement important ( environ 900Mo en 24H ) Sur mon réseau web, il s'est avéré que la HC2 consomme une bonne partie de mes échanges sur le web N'ayant pas un débit de folie, cela a attiré mon attention. Quelqu'un a t'il remarqué cela chez lui ? A part allez chercher des infos de météo, je ne vois pas ce que la HC2 doit allez chercher en externe comme données .. Si quelqu'un a des explications, je suis preneur Voila un aperçu et on peut voir qu'elle va chercher beaucoup trop de données à mon gout en 24H ( voir pièce jointe ) J'ai désactivé pour le test tous mes scénarios la HC2 est en 192.168.1.202 le lien ci dessous affichera une image de meilleure qualité que la pièce jointe https://dl.dropboxusercontent.com/u/72300194/Capture%20d%27%C3%A9cran%202016-08-20%2012.48.57.png Merci pour votre retour
  5. Mise à jour

    Version 4.090 This update features migration process from version 3.601, reconfiguring every device, adjusting it for changes which took place in the system. This will assure possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please refer to message that appears in interface and Notification Center after finishing upgrade for further instructions. Important! Updating from version 3.601 may take longer than usual, up to 30 minutes, please do not restart controller during update process. Resolved issues: - #0003578 Danfoss thermostat shows unreal value - #0003883 No reports from Northq Gas Meter NQ-92021 - #0003605 #0003962 #0003962 Weather is not updating (weather information provider changed to yr.no) - #0003094 Alarm panel doesn't record change of alarm state - Protection Command Class not working on devices without template - 503 error when deleting section in some cases - Malfunction of RGBW when changing controlled device to RGB - NaN displayed in device serial number - Scene Activation not working when triggered multiple times by the same id - Mobile applications: Change of devices order not possible for non-admin users - Philips Hue plugin does not allow new user configuration. Reinstall existing plugin to enable fix - Wind speed available in weather conditions computed incorrectly - value too low - Services Restart called from 503 error page not working - Scenes do not trigger when RAM usage is above 75%. Threshold moved to 90% - Device hierarchy not displaying properly for Dimmer 2 in advanced configuration - Z-Wave Weather templates lacking for devices of other manufacturers - Weather refresh and schedules hang - Other minor fixes New devices support: - Fibaro Button - #0003488 Aeon Labs Multisensor GEN 5 - #0003244 Zwave.me Keyfob GEN 5 - MCO MH10 PM2.5 Monitor - MCO MH9 CO2 Monitor - Aspire RF9518 - Aspire RF9534 - Aspire RF9536 - Leviton VRI06-1L - Leviton VRI10-1L - Leviton VRE06-1L - Leviton VRF01-1L - Leviton VRS15-1L - Leviton VRS05-1L - Leviton VRCS2-MR - Leviton VRCS4-MR - Leviton VRCZ4-MR - Leviton VRCZ4-MO - Leviton VRCS1-1L - Leviton VRCZ1-1L - Vitrum Think Simple IV Scenari - Secure SWM301 Other improvements: - #0003844 Confirmation pop-up is now displayed when restoring or deleting backup - Favicon added - Satus bar is scrolled with page - Notification Center is available directly on the status bar - Battery devices now work on default wake up interval when included - Serial number is now displayed in advanced configuration of devices that declare it - Setpoint thermostats capabilities are flexibly adapted when device is included - Minor UX inconsistency fixes - Firmware Update - wireless update of Z-Wave devices: Motion Sensor, Dimmer and Wall Plug. Availability of update for each device is showed in Notification Center and Advanced Configuration. Run update only when devices is in close range from controller (ca. 2 m). Process can take up to 30 minutes, depending on Z-Wave traffic and devices queued for update. Details on whole procedure can be found in notification displayed before every device update. - New, configurable scenes triggering modes available in each scene advanced configuration: Automatic - scene gets triggered either by one of defined triggers (device state, global variable etc.) or manually, by 'Run' button Manual - scene executes only manually by 'Run' button Disabled - scene is inactive, does not get triggered and cannot be run manually Visibility - scene can be hidden in all interfaces (mobile apps, web interface)
  6. Version 4.080 was just released. Full list of changes is presented below. Version 4.080 This update features changed migration process from version 3.600, reconfiguring every device, adjusting it for changes which took place in the system. This will assure possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please refer to message that appears in interface and Notification Center after finishing upgrade for further instructions. Important! Updating from version 3.600 may take longer than usual, up to 30 minutes, please do not restart controller during update process. Resolved issues: - #0002290 #0003353 Devices with sceneActivation are not available in Block and Magic scenes - No user icons in Remote Access - Gateway Connection - devices with polling interface are not being imported - 503 error when including blind controller from some manufacturers - Delays in Z-wave network after setting RGBW Controller to desired level - Lua scenes: inappropriate line number in error debug New devices support: - FIBARO SWIPE - Z-Wave.Me ZMR WCS 6 v1.4 - Z-Wave.Me On Off Switch - Z-Wave.Me FB10 v1.1 - Z-Wave.Me Wall Controller v1.1 - Z-Wave.Me TZ68 g v1.0 - NodOn Octan Remote v2.3 - Philio PSM02 4 in 1 Sensor v1.0 - EMINENT EM6570 - EMINENT EM6550 - TKB Home Wall Plug v1.1 - TKBHome TZ67 v1.12 - Reitz Group ZW ESJ v1.0 - Reitz Group ZS 3500 v1.0 - Reitz Group IP44 On Off Switch v1.0 - FortrezZ LLC-SSA03 v2.5 - GreenWave Powernode v4.27 - Qees Remote Controller v0.5 - Jasco Products Wall Outlet v1.16 - Jasco Products ZW3003 - Jasco Products ZW4101 - Everspring HAC01 v2.0 - BeNext-Dimmer - BeNext-Forest Curtain rail with motor - wiDom-Universal Power Meter v1.30 - Popp Dimmer v1.0 - Popp On Off Socket v1.0 - CBCC Sarl-Swiidinter - Aeon Labs SES G2 - Aeon Labs Aeotec Smart Energy Power Strip (DSC11-ZWUS) - Aeon Labs Micro Smart Energy Switch - Aeon Labs Recessed Door Sensor - Aeon Labs DSC26103 - Vision ZR1202 v1.74 - Vision Security ZS5101 v1.65 - Kwikset-Smart Code 916 v3.37 - Yale-T1L v18.128 - Yale Door Lock v80.32 - RTC-CT100 Thermostat v9.1 Plug-ins: - Russound - source change now available. In order to utilize this feature delete and re-install Russound plug-in. Other improvements: - PIN dfor new user is now set to '1111' by default - In case of empty user PIN, it is set to default value - '1111' - Improved stability - Minor UX fixes - New actions in Lua scenes: - fibaro:call(ID, 'startLevelIncrease', x, y) - fibaro:call(ID, 'startLevelDecrease', x, y) - fibaro:call(ID, 'stopLevelChange') These calls can be used to start increasing or decreasing Multilevel Switches (like Dimmer 2, RGBW or Roller Shutter 2 modules) value. 'x' and 'y' are optional parameters, used to set respectively time frame in which change should be applied and starting level. 'stopLevelChange' stops previously send action. - fibaro:getDevicesId(x) Call used to get table with IDs of devices that meet requirement specified by 'x'. Examples: print('All devices with parameter visible equal to "true" and enabled equal to "true":') ids = fibaro:getDevicesId({visible = true, enabled = true}) print(json.encode(ids)) print('ALl devices with energy interface:') ids = fibaro:getDevicesId({interfaces ={"energy"}}) print(json.encode(ids)) print('All devices with "unit" property (no matter its value):') ids = fibaro:getDevicesId({properties = {unit="nil"}}) print(json.encode(ids)) - filters in /api/devices that allows for filtering out devices that meet some requirements, examples: HC IP/api/devices?visible=true returns devices with visible equal to 'true' HC IP/api/devices?property=[batteryLevel,100] returns devices with property batteryLevel equal to 100 HC IP/api/devices?interface=light returns devices with light interface Multiple filters can be used together, for example: HC IP/api/devices?visible=true&interface=light returns devices with visible equal to 'true' and with 'light' interface CHANGES INTRODUCED IN VERSION 4.X: - Drag & Drop for devices and scenes - available on home, devices and rooms screens. Assigning devices to rooms and changing its order is now much easier and faster. - Temperature Panel - allows to see history of temperature changes in rooms and on each device. - Diagnostic Panel - general information about HC working condition like CPU & RAM usage, free space on hard drive. Will be extended in future versions. - Soft Device Reconfiguration - option allows to save settings, parameters and device ID. Thanks to that scenes with reconfigurable device will not require editing. Full reconfiguration will remove and add the device to the Z-Wave network, resulting in the loss of its settings, parameters and change the device ID.. - Mesh Network Reconfiguration - available on Configuration -> Z-Wave Network - New Z-Wave engine - redesigned and rewritten from the scratch. Now is faster and has better support for devices. - Z-Wave Door Locks support - controlling and PIN settings. - Thermostats - extended controlling for thermostats from manufacturers like: Honeywell, Trane Corporation. - Extended tamper for sensors - exclusive information for motion detection and violation of sensors. - Fibaro Smoke Sensor extended support - level of smoke and gap to alarm level is reported and visible on charts. Sensitivity level is now easier to set. - Fibro Motion Sensor new device - when seismometer mode is turned on new device reporting tremors is available. Charts for temperature and illuminance. Additionally information about sensor violation. - Device hiding - device that is not in use can be hide without removing it. - Device deactivation - deactivated device is visible in UI but can't be controlled. - Multithreading added for HC (server and z-wave) - now engines work much faster. - Event panel moved - for better usability now is available in menu on right side of screen. - Pre-Update Confirmation - installing update will prompt user additional confirmation. - Added support for American English (EN-US) - User rights management - moved to Configuration. - Recovery Memory Health - can be checked on Backup & Recovery - Backups has information about compatibility with current HC version - Block scenes improvements - for device only available actions are visible, scene activation block added and logical conditions grouping using brackets. - Lua Scenes - updated tool-tips for devices. - Rest API Active Documentation - documentation and ability to test REST API requests, access at HOME_CENTER_IP/docs Plugins: - Plugins are grouped in categories: Safety, Cameras, Climate, Multimedia, Others - Plugins search - Network devices search via ARP Plugins category Safety: - DSC Alarm - for DSC Alarms, - Helios Basic - integration using Basic license, - Helios Gold - integration using Gold license - Mobotix - for Mobotix videophone, - Satel Alarm - for SATEL - Modular Alarm Plugins category Cameras - more than 130 devices from various manufacturers Plugin category Climate - Carrier Furance - WS Davis Vantage - Nest - plugin for well-known thermostat - Netatmo - plugin for thermostat and weather station from netatmo Plugins category Multimedia - LG Bluray - LG TV* - NC + mediabox, compatible devices: mediaBOX+ (ITI-3740SX, ADB-3740SX) and turboBOX+ (ITI-5720SX, ADB-5720SX) - XBMC Remote Control - Denon Amplifier - LG Bluray - Onkyo Amplifier - Philips Bluray - Pioneer Amplifier - Samsung TV* - Sonos - Sony Bluray - Sony TV* - Logitech Harmony * some TV Sets firmware version may not be supported Plugins category Other - Philips Hue - Wake on LAN - Planika Fireplace Other changes, many other improvements to the system
  7. Mise à jour

    La 1.9.1.1 officielle est de sortie : 1.9 -> 1.9.1.1 - Improves scenes in-app display engine - you can disable a scene, hide it or allow only manual run
  8. La V1.5.0 officiel est de sorti : Changelog 1.4.4.2 -> 1.5.0 - Adds support for Fibaro Button - Adds Russian translation - Adds Chinese (Simplified) translation - Minor bug fixes Elle s'est installée automatiquement chez moi, nickels, rien à signaler et toujours aussi fluide.
  9. Mise à jour

    Nouvelle version officielle : Changelog 1.5.0 -> 1.5.1.1 - Improves scenes in-app display engine - you can disable a scene, hide it or allow only manual run
  10. Mise à jour

    Mise à jour : 18 mai 2016 Nouveautés de la version 2.9.0EN - added support for Fibaro Button - added Russian translation - added Chinese (Simplified) translation - minor bug fixes and improvements PL - dodano wsparcie dla Fibaro Button - dodano tÅ‚umaczenia dla jÄ™zyka rosyjskiego - dodano tÅ‚umaczenia dla jÄ™zyka chiÅ„skiego (uproszczonego) - dodano drobne poprawki i usprawnienia
  11. Mise à jour

    Mise à jour : 18 mai 2016 Nouveautés de la version 1.80EN - added support for Fibaro Button - added Russian translation - updated Chinese (Simplified) translation - minor bug fixes and improvements PL - dodano wsparcie dla Fibaro Button - dodano tÅ‚umaczenia dla jÄ™zyka rosyjskiego - zaktualizowano tÅ‚umaczenia dla jÄ™zyka chiÅ„skiego (uproszczonego) - dodano drobne poprawki i usprawnienia
  12. Bon, la beta passe en officiel, avec le support d'Android wear : http://forum.fibaro.com/index.php?/topic/21298-fibaro-for-android-phone-1841/ Change log : 1.8.3 -> 1.8.4.1 - Adds support for Android Wear: smartwatch application supports running Home Center Scenes. - Adds support for adding and running widgets configured from more than one Home Center. - Adds new camera view mode: just rotate screen horizontally to enjoy fullscreen preview. - Improves RGBW controlling on devices list.
  13. Mise à jour

    Bonjour, Depuis hier, fibaro a sorti une mise àjour sur l'application iPhone 2.8.2 D'après le descriptif, ils auraient corriger un bug sur la transmission du GPS. Mais chez moi ça marche toujours pas mieux. Aucune info remonte vers la HC. Pas d'ongles famille. J'ai fait une scène mode bloc pour envoyer une notification si je m'éloigne àplus de 100 m de chez moi, mais rien ne passe. Alors est que quelqun a du neuf àce sujet ? Merci !!
  14. Bonjour Je fais ce tuto afin de répondre aux question que certains ce posent "Comment et Que faire du Template" A quoi cela va t il servir ? Grâce au fichier ZIP que l'on va extraire de notre BOX et d'un fichier PDF de la doc de notre module Fibaro va intégrer notre module dans une futur version. pour le PDF Google est notre amis C'est Cool mais comment on fait ? On ce rend dans diagnostics. On clic sur Download device's Template Et la un message d'erreur, On ne panique pas on va sur modules. On sélectionne notre module on clic sur Soft reconfigure device On clic de nouveau sur I know what I'm doing. Continue. On patiente un peu surtout pour le module sur pile. On doit obtenir un message de ce style. On clic sur Download Si cela ne fonctionne pas il faut réveiller le module (modules sur pile) Et miracle on peut télécharger le template de notre module au format ZIP. Voila il ne nous reste plus qu'à envoyer le fichier ZIP et la doc au format PDF a Fibaro Il faut parler anglais. Si vous êtes comme pas très bon pour pas dire nul utilisé Google translate Sa ne sert a rien de faire un long discourt ce qui les intéressent c'est le fichier ZIP et peut être la doc. Précision : 1. Devices version 2. Z-Wave protocol version 3. Fichier template ZIP 4. Fichier doc PDF Envoyer le tout là : http://bugzilla.fibaro.com/ Ex pour les Danfoss LC13 : http://bugzilla.fiba...iew.php?id=2950 Merci à Bono2007 pour ces précisions
  15. Mise à jour béta 1.8.4 Mise à jour pour les personnes inscrites au programme de développement béta Fibaro Changelog :
  16. Mise à jour

    Version 4.070 This update features changed migration process from version 3.600, reconfiguring every device, adjusting it for changes which took place in the system. This will assure possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please refer to message that appears in interface and Notification Center after finishing upgrade for further instructions. Important! Updating from version 3.600 may take longer than usual, up to 30 minutes, please do not restart controller during update process. Resolved issues: - #0003502 Aeon (4 in 1) Humidity Sensor - humidity now updates correctly - Devices no longer show up as "Not configured" after controller reboot - Values in Seismometer Mode in Motion Sensor v2.7 are now reported correctly - Logitech Harmony plug-in behaviour is adjusted to recent changes in Logitech's API - PTZ cameras movement can now be controlled as plug-in with mobile devices - Drop-down lists on Firefox version 40 and above are now fully functional - Devices with multiple endpoint are now building correctly even without templates - Minor UI bugs fixes - #0003538 Status Off after Soft Reconfiguration - #0003208 AEOTEC GEN 5 Siren doesn't work - #0003557 Template misssing for Zwave.ME WIN ITEMP - #0003560: PHI_PAN06 Relay Insert 2 * Template - #0003628: Can't select devices as actors into alarm actions like panic, lights on - #0003530: many problems with HRT4 ASR-ZW - Settings page for Polylock device do not load - There is no "controlled device" after soft reconfiguration - Problem with authentication to cameras under IE, Safari and Chrome browsers - Breached sensor with Arm Delay causes instant alarm after being armed - #0003667 Scenes change type when saved - #0003690 Block scenes - set values in green fields are not displayed properly - UBS, D/W Sensor - random incorrect reports with value 0 are being received - Battery icon not shown in main device - #0003730 AEON 6 in 1 - device page does not load - #0003711 No Recovery memory status in Backup & Recovery tab - #0002322 #0002318 Smart Energy Switch - device lacks measured power value - #0003735 Learning mode error - inclusion mode locks, reboot is required - #0003745 Wall Plug icon is missing in Magic Scenes - #0003763 Block and Lua scenes are generated empty and require save to be edited - Hour in Magic Scenes displayed inappropriately - Verification of Recovery Memory status requires double click - Magic Scenes based on time loops when triggered manually New devices support: - HEATIT Z-Wave Thermostat - Evolve LDM-15 - Evolve LPM-15 - Evolve LFM-20 - Evolve LRM-AS-W - Evolve LOM-15 - Evolve LTM-5 - Evolve LSM-15 - Evolve LRM-1000 - Ecolink Z-Wave Garage Door Tilt Sensor - Linear/ GoControl WAPIRZ-1 PIR Motion Detector - Danfoss RS Room Sensor - FortrezZ WWA01AA - FortrezZ WWA-02 - Philio PAN06 - Everspring SF813-2 - #0003573, #0003612 - AEON MultiSensor 6 - RCS EM52-ZW - RCS PMC40DR-ZW - Everspring HSM02 - AEON DSB05 - AEON DSB28 - #0002435 Aeon Labs Smart Switch DSC24 - #0002306 Aeon Labs DSC06106 - FGGC-001 Following devices received generic templates that cover devices in various versions: - Aeon Minimote - Aeon Micro Smart Energy - Aeon Home Energy Meter - Aeon Smart Energy Switch - Aeon Dimmer - Aeon Door Window Sensor - Aeon Z Wave Multi Sensor - Aeon Key Fob - Aeon Siren - Aeon Recessed Door Sensor - Aeon On Off Switch - Aeon Smart Switch ZW075 - Aeon Smart Strip - Aeon DSD37 - Poly-control Danalock - TKB Home TZ69 - Philio D/W Sensor PST02-1C Generic templates guarantee compatibility of all devices of given kind, regardless the version, as long as device has the same product ID (which depends on its manufacturer) New plug-ins: - IP Bell VoIP SIP video door entry phone station - Verde IV camera - DENON HEOS 3/link - Russound X5 Controller - Nuvo Gateway/NV-P3100/NV-P3500/P100/P200 Other improvements: - UI was optimised, increasing interface performance significantly - Template matching mechanism optimized - Due to multiple requests we introduced mechanism of limiting number of single scene instances running simultaneously. Maximum number is 10 instances active at the same time. It is available in all types of scenes. In case of exceeding given number the additional scene will not be started and proper notification will appear in Notification center. Remember, that all block and magic scenes based on time have always once instance running in loop, so if there is only single instance allowed, clicking "Run" button will have no effect. - In case of exceeding 95% of RAM's "used space", no new scenes will be triggered until that value drops again - Adding devices with mobile app no longer includes them in secure mode. Non-secure inclusion is default mode now - Improved camera streams performance both in remote and local access - Time from last breach is now displayed in logs underneath each sensor - Logs are now displayed and refreshed properly - Notifications received from Dimmer 2 (regarding issues like over-current, load error etc) are now displayed in log window (located on the top of main page) - Improvements in recovery mechanism, both in operating system and user interface - SceneActivation interface will be added automatically if device uses this Command Class (even if device does not declare support explicitly) - Custom handling of some power/energy reports (for third party devices) - Improved communication with battery operated devices (unsuccessfully sent commands won't be dropped) - Improved Z-Wave engine stability - Notification about exceeding RAM limit (95%) by scene will no longer be duplicated - Block and Magic scenes triggered by some value that persists for given time are now aborted immediately if condition is not met - Default number of instances in all kinds of scenes is set to 2 - Support for devices that use Central Scene (keyfobs, wall controllers etc) added - Minor UX improvements Important! This version introduces new Privacy Policy, which will help us to provide even better service and software for your use. Please refer to pre-update message for more details.
  17. Bonsoir à tous, Je me demandais s'il n'était pas possible de trouver l'adresse (url) du repository dans lequel Fibaro publie ses firmwares. Les box se connectent forcément à une adresse web pour vérifier l'existence de nouveaux firmware et les téléchargent pour installation lorsque c'est le cas. Mon idée est la suivante : Si on parvient à trouver cette adresse et à obtenir les fichiers de firmware, il devrait être possible via le mode recovery ou un autre hack d'inoculer le firmware à la box sans passer par le système de MAJ de l'interface classique. Ainsi, nous aurions le choix d'installer une v4 sur une HCL en v3 sans avoir à attendre la mise à disposition par Fibaro (attente de plus de 9 mois pour ma part...). Bien entendu, la manipulation ne sera pas sans risque mais pour ceux qui sont prêt à assumer la reconfiguration de l'ensemble de leur modules, ça semble être une alternative intéressante. Quels sont vos avis sur la questions ? L'un de vous aurait-il une piste ? Cordialement, Milkshake
  18. Mise à jour

    Liste des modifications logicielles 4.056:This version provides new functionalities and fixes some of the issues reported by users. Version 4.056 > New Features: Setpoint and other thermostats are now available to use in block scenes and LUA editor New "Barrier Operator" device type support Web interface performance improvements > New Devices Support: Z-Wave Thermostats: 2gig CT100 v9.1 RCS TBZ48 v1.2 RCS TZ45 v2.41 Honeywell #TH8320ZW01 v1.3 and v2.0 Trane TZEMT400BB32MAA v2.15 WEXCEL WT510 v2.4 Other Z-Wave devices: Aeon Siren Gen5 v1.23 Vision ZS6101EU Think Simple III EU DIMMER Wireless NWE030 Modulo II DIN ON-OFF Wireless ZWD020/SL Think Simple III EU ON-OFF Wireless NWE030 Think Simple I BS ON_OFF Wireless NWB010 Think Simple IV BS ON-OFF Wireless NWB040 Think Simple II BS ON/OFF Wireless NWB020 Think Simple I BS Satellite Wireless NWB010 Think Simple II BS Satellite Tapparelle Wireless NWB020 Think Simple II BS Tapparelle Wireless NWB020 Think Simple II EU DIMMER Wireless NWE020 Think Simple II EU ON/OFF Wireless NWE020 Think Simple IV EU ON/OFF Wireless ZWE040 Think Simple II EU Satellite Tapparelle Wireless NWE020 Think Simple III EU Satallite Wireless NWE030/SS Think Simple II EU Tapparelle Wireless NWE021 Linear Garage Door Opener Cameras: HIKVISION IP Camera ds2cd2132i Axis GeoVision Speco GEN IV Plugins: Logitech Harmony Nest improvements NetAtmo improvements > Resolved Issues: #0003434: Number missing in the scale #0003322: 4.047: Vision Security ZM1601 Z-Wave Siren #0003065: 4.037 RAM Graph day of the week wrong. Z-Wave engine stability and other improvements DSC Alarm support improvements Web interface improvements for non-admin users Magic Scenes editor visual improvements SMS notifications can now be selected for every device type Energy and Temperature Panel improvements Slider state synchronization in Virtual Devices > Known issues: - Using multichannel associations requires soft reconfiguration of devices - Inconsistencies in Satel interface - Power Metering may not work properly for some devices - Alarm Panel doesn't work in some specific configurations - Plugins for TV Sets of various manufacturers may not work with its newer firmware due to restrictions provided by new devices firmware. There will be added detailed information about supported firmware versions within plugins. - Breached sensor with Arm Delay causes instant alarm after being armed - Data range selection in event panel doesn't work properly - Devices imported via Gateway Connection may have no icons - Gateway Connection status of dead device between master and slave controller may be different - Devices not properly configured on 3.X may not be converted properly - On mobile clients devices may be visible in different categories than configured - Horstmann Thermostat HRT4-ZW higher battery usage in some cases - Doorlocks some functions may not work properly For proper operation of all new features following versions of mobile applications are required: - Fibaro for iPhone 2.6 - Fibaro for iPad 1.60 - Fibaro for Android phones 1.6.5 - Fibaro for Tablet 1.3.4. or newer.
  19. SmartPhone Fibaro Android 1.7.1 Native Application designed for FIBARO® System. This Application is the most modern, easiest and user friendly software used to control (also remotely) Your house electric devices connected to the FIBARO® System. It is complete BMS application. Application designed for FIBARO Home Center 2. Features: - GPS tracking - LiLi ( voice control – in English and Polish – next languages available soon) - Gesture control the whole house from the main application screen - Push notification - Lighting/ temperature/ humidity/ security system control - Multi- language - Possibility to change icons for devices and rooms - Possibility to display current power consumption - Power and connection mode (wifi/2g/3g etc.) And many more… FIBARO System converts any home or apartment into a smart one, increasing both comfort and security. It was designed from scratch by Fibar Group’s engineers to enable intelligent building management. The System is based on the Z-Wave wireless standard and is able to control the majority of electrical devices and appliances in the home. Thanks to FIBARO a smart home can be controlled from anywhere in the world via user-friendly interfaces for devices such as laptops, smartphones and tablets. The System operates autonomously, based on information received from sensors and via GPS. The FIBARO System is installed on existing electrical system without a need to modify the building structure. Changelog 1.7.0 -> 1.7.1: - Added support for Zipato RGBW - Improved thermostat temperature and time selection - Added other minor improvements and bug fixes Requires HC version 3.559+ lien : https://play.google.com/store/apps/details?id=com.fibaro
  20. Mise à jour

    à‡a dort sur le forum! Dear Users, We just released version 4.054 for Home Center Lite. It is available for versions 4.041 and newer. This version fixes some of issues reported by users. 4.054: > New Devices Support: - MCO MH8-FC-EU - MCO MH8-FC4 - MCO MH6-HP - AEON LABS Siren GEN5 > Resolved Issues: - Fixed Multi Channel Association Support for versions 2.4 and 2.5 of Fibaro Wall Plug - soft reconfiguration required - Shedule based activities (e.g. panels) improvements - Fixed General page issue, regarding temperature thresholds and main sensors > Known issues: - Using multichannel associations requires soft reconfiguration of devices - Android version of the Fibaro mobile app does not display icons for following devices properly: - NetAtmo Thermostat - NetAtmo Weather Station - Sonos - Inconsistencies in Satel interface. - Power Metering may not work properly for some devices - Alarm Panel doesn't work in some specific configurations - Plugins for TV Sets of various manufacturers may not work with its newer firmware due to restrictions provided by new devices firmware. There will be added detailed information about supported firmware versions within plugins. - Breached sensor with Arm Delay causes instant alarm after being armed - Data range selection in event panel doesn't work properly - Devices imported via Gateway Connection may have no icons - Gateway Connection status of dead device between master and slave controller may be different - On mobile clients devices may be visible in different categories than configured - Horstmann Thermostat HRT4-ZW higher battery usage in some cases - Doorlocks some functions may not work properly
  21. Nouvelle version de l'appli tablette : Changelog 1.4.0 -> 1.4.3: - Added support for Zipato RGBW - Added RGBW device to light dashboard - Improved thermostat temperature and time selection - Other minor improvements and bug fixes Installée et ok pour moi ! ​
  22. Mise à jour

    Au fait, la 1.70 était sorti : http://forum.fibaro.com/index.php?/topic/20063-fibaro-for-android-phones-170/ La partie Thermostat est vraiment top désormais sur l'appli, j'avais oublié de le remonter ici. Vraiment pratique le nouveau visuel avec la consigne et la valeur actuelle dans la liste déroulante !
  23. Mise à jour

    Bon mise à jour de la HC Lite vers 3.601 Change log : Liste des modifications logicielles 3.601: This update is meant to prepare system for future update to version 4.X. If "System temporarily unavailable" text will appear during update, please wait - you will be redirected to the main page when all services start. Mobile apps fully working with this version: - iPhone app - version 2.1.1 (available on the App Store), - Android phones app - version 1.3 (available on the Google Play), - iPad app - version 1.2 (available on the App Store). and later. 3.601: - Prepares Home Center system working under version 3.x to be able to upgrade to 4.x Qui s'y colle ?
  24. Dear users, We have just released version 2.6.1 of Fibaro for iPhone application. Changelog 2.6 -> 2.6.1: -Added support for Seismometer -Added support for Accelerometer -Improved video stream display -Improved videogate operation -Fixed other minor bugs Changelog 2.5.2 -> 2.6: -Demo mode - available after choosing DEMO from HC List -Added support for Linear Garage Opener -Added support for new devices of Nest plugin -Visual improvements of virtual devices -Minor application improvements This update should be available to download for App Store in next few hours.
  25. Et bien voila la mise à jour vers la V4 est dispo pour les HCL 3.594 !