Aller au contenu
mprinfo

Installation HP GEN8 - ESXI 6.5U1 + VM DSM 6.2.2

Recommended Posts

Bon, j'ai essyé une dernière fois ESXI, j'ai tout essayé pour faire un backup de ma VM, tout est lent et/ou pas mal de chipo et demande un downtime important des machines.

J'en ai profité pour tester/installer ESXI 7.0 ... idem, pas moyen de faire des backups à chaud sur version Free... ils ne se sont pas trompé chez VMWare... j'ai même été voir les prix.... (pour info bis: le contrôleur B120i es plus supporté, donc mode AHCI)

Brefle, 

J'ai tout scratché, (désolé  @jojo :rolleyes: ) et installé Proxmox.Jusqu'ici tout va bien, très sympa, moins fouillé que ESXI bien sûr, mais l'essentiel est là:

- Je peux faire des backups à chaud

- monter des disques USB externes (pas encore testé comme destination de backup)

- a tester: l'installation de dockers directement dans proxmox... je sens que ça va être bien cool, pcq Proxmox tourne sur Debian.

- a tester: OMV avec duplicacy, 

- a tester: Jeedom

- a tester: portainer, nextcloud, filecloud, cockpit, zoneminder (surveillance station)

 

ah oui, et j'ai commandé pour moins d'une 30aine d'euros une vraie carte RAID HP P420 1GB avec batterie sur la baie.

2be continued !

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello esxi 7 ne fonctionne pas sous gen8

Envoyé de mon BLA-L29 en utilisant Tapatalk

Partager ce message


Lien à poster
Partager sur d’autres sites

Heuuu ben si, je l'ai installé :rolleyes:, ça va très bien mais sans le contrôleur raid.

 

Et suis pas le seul, par exemple: https://homeservershow.com/forums/topic/17689-attempt-at-installing-esxi-70-on-gen8/

Partager ce message


Lien à poster
Partager sur d’autres sites

Je viens de tester le snapshot de machines à chaud sur disque usb externe ... et c'est automount avec un package a installer 

CA c'est avoir la vie facile. :60:

On peut même scheduler.

Que demande le peuple !

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites
Heuuu ben si, je l'ai installé :rolleyes:, ça va très bien mais sans le contrôleur raid.
 
Et suis pas le seul, par exemple: https://homeservershow.com/forums/topic/17689-attempt-at-installing-esxi-70-on-gen8/
C'est bien ce que je dis

Envoyé de mon BLA-L29 en utilisant Tapatalk

Partager ce message


Lien à poster
Partager sur d’autres sites

De toute façon c'est un fakeraid controler... Autant le gérer avec proxmox/esxi.
Perso je préfère des bons backups réguliers et les alertes de SMART ou alors un vrai raid 1 (d'où l'achat de la carte, je pense que pour 30€ ça les vaut largement)

Envoyé de mon SM-N960F en utilisant Tapatalk

Partager ce message


Lien à poster
Partager sur d’autres sites

Euh, sur le gen 7 c'était du Fake FAID.

 

Sur le Gen 8, la b120i est un vrai contrôleur RAID, pas un fake.

 

Par contre elle est limitée, comme elle n'a pas de mémoire cache ni de batterie, ils ont bloqué la possibilité de faire du RAID 5, sinon les performances auraient été désastreuses.

Mais les niveaux supportés, RAID 0, 1, et 10 sont bien du vrai RAID matériel, et ce qui est bien c'est que les grappes RAID sont reconnues sur une autre carte RAID (j'ai la HP p222 personnellement), et cela dans les 2 sens.

 

Attention un RAID 1 ne remplace pas les sauvegardes ;)

Partager ce message


Lien à poster
Partager sur d’autres sites

Oui, merci @Lazer, on est bien d'accord, j'ai de bons backups, c'est juste pour éviter un downtime et la réinstallation ;)

 

Pour le B120i, il y a discussion, on est d'accord, ce que je veux dire c'est que il n'y a pas de chip pour les calculs de parité toussa-toussa ... c'est le driver (CPU) qui calcule... sans driver, pas de RAID... donc ça ou une carte sata, je vois pas trop la différence... une des réaction très courante sur le web:

Et c'est pour ça que ESXI se fait pas "iech" à développer un driver. Sans driver, y'a plus "rien".

 

Citation

Is there a driver available for the operating system you plan to use? Keep in mind the B120i is in fact a chipset SATA controller. Many refer to this as 'fake raid' as the RAID functionality is in the driver and not the hardware itself.  There are drivers for supported Windows versions, as well as supported Red Hat and SUSE Linux versions.  On the Linux side, the drivers are kernel dependant and you can end up in a situation where you have to wait for the driver release until you can upgrade to the next minor release.  The drivers for RHEL 7.5 were just released in the last few weeks.

 

Partager ce message


Lien à poster
Partager sur d’autres sites
Il y a 22 heures, sebcbien a dit :

J'ai tout scratché, (désolé  @jojo :rolleyes: ) et installé Proxmox.Jusqu'ici tout va bien, très sympa, moins fouillé que ESXI bien sûr, mais l'essentiel est là:

- Je peux faire des backups à chaud

- monter des disques USB externes (pas encore testé comme destination de backup)

- a tester: l'installation de dockers directement dans proxmox... je sens que ça va être bien cool, pcq Proxmox tourne sur Debian.

- a tester: OMV avec duplicacy, 

- a tester: Jeedom

- a tester: portainer, nextcloud, filecloud, cockpit, zoneminder (surveillance station)

 

Puisque tu es dans les tests, tu peux éventuellement essayer l'installation de Jeedom sous Debian Buster.

Voir ICI

 

Attention : cette installation automatique est en beta

Je suis toujours sous Debian 9 (Stretch) et je n'ai pas vérifié si les plugins tiers sont tous compatibles Buster

 

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites

@i-magin

Waw ... nickel, j'ai remonté mon Jeedom en 10 min même pas !

Y'a vraiment que a appuyer 2-3 fois sur les flèches pour choisir l'install et tout s'installe, la Debian et Jeedom.

Ensuite il demande de changer le mot de passe par défaut (admin-admin)

Ensuite aller dans backup, uploader le dernier (stocké sur mon nas) et clickclickclik il est remonté.

Un reboot pour la forme... hallucinant, sur mon G8 avec un proc, ca démarre complètement en quelques secondes, moins de 10 je dirais depuis le start de la VM :o

J'aurais peut être pas du redémarrer tout de suite car après un restore de backup, il installe les dépendances en background... après le reboot tout semble continuer, il continue à installer des dépendances.

Globalement, c validé pour moi !

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites
il y a 27 minutes, sebcbien a dit :

Y'a vraiment que a appuyer 2-3 fois sur les flèches pour choisir l'install et tout s'installe, la Debian et Jeedom.

tu n'oses plus dire clic, clic, clic ??? lol

 

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites

Ici c'est ESXI

 

jeedom on s'en fou il y a un topic pour cela :D

  • Like 2

Partager ce message


Lien à poster
Partager sur d’autres sites

Je veux bien, mais le topic Jeedom a été pourri avec des voitures électriques
@jojo pas de souris a ce niveau, c'est de l'écran/clavier

Envoyé de mon SM-N960F en utilisant Tapatalk

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites
il y a 26 minutes, mprinfo a dit :

Ici c'est ESXI

 

jeedom on s'en fou il y a un topic pour cela :D

ça dépend, c'était au passé ou au présent ?:98:

  • Like 2

Partager ce message


Lien à poster
Partager sur d’autres sites

DS3617xs Release Notes

Version 6.2

All versions

Version: 6.2.3-25426-2

(2020-07-16)

Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.

The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.

This update will restart your Synology NAS.

What's New

Added support for Synology Expansion Unit FX2421.

Fixed Issues

Fixed the issue where a DS920+ or DS720+ might not enter hibernation when its connected expansion unit has entered deep sleep.

Fixed the issue where drive status LED indicators on a connected expansion unit might not work properly when the expansion unit wakes up from deep sleep.

Fixed the issue where daylight saving time might not display correctly in certain time zones (e.g., Dublin, Casablanca).

Fixed the issue where mounted remote shared folders on a Synology NAS may cause volumes to operate improperly or the Synology NAS unable to shut down in certain scenarios.

Fixed the issue where the system might incorrectly prompt "drive slot disabled” notice when a DS413 or DS213+ wakes up from deep sleep.

Enhanced the performance in writing a large number of files to a Btrfs volume with RAID 1 configuration using hard disk drives (HDD).

Fixed the issue where Synology Universal Search and Synology Drive might consume excessive CPU resources when the option "Utilize unused memory as database cache to improve (search) performance" has been enabled.

Fixed the issue where domain-related services might not resume working because the update of domain data could not be complete.

Fixed security vulnerabilities (Synology-SA-20:18).

Fixed the issue where the system might incorrectly prompt IP address conflict warning if a network interface card is attached to Synology NAS and the option "Reply to ARP requests if the target IP address is a local address configured on the incoming interface" is disabled.

Fixed the issue where the status of an Ethernet port might not be detected properly when the Ethernet port is not connected to a network cable while Open vSwitch has been enabled.



Envoyé de mon BLA-L29 en utilisant Tapatalk

Partager ce message


Lien à poster
Partager sur d’autres sites

mise a jour Ilo4 Version :2.76 (4 Nov 2020)

 

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_05d0ca21a226439086cf02c9a0#tab-history

 

aa.jpg

  • Like 3

Partager ce message


Lien à poster
Partager sur d’autres sites

Hello, 

 

je viens de faire l'upgrade 6.5 à 6.7

 

image.thumb.png.4863e7eb225033b2520eb5176896b714.png

 

 

Sauf que j 'ai un soucis j 'ai perdu 2 datastores ( mon disque SSD ) :3:  .Je vois que mes datastores montés sur mon NAS.

 

je vois mon SSD depuis le stockage :

 

image.thumb.png.01af906ad446504c1482f2de47df4592.png

 

 

Mes 2 datastores perdus doivent  être ici je présume :

 

image.thumb.png.cba124d2afbece4a60a2d5aa564ec678.png

 

mais comment faire pour les ajouter de nouveau ?

 

mes adaptateurs sont tous Etat inconnu :

 

image.thumb.png.fb7dabf9debc9b1dab9606f53dad0dd2.png

 

 

Avez -vous une idée ?

 

Partager ce message


Lien à poster
Partager sur d’autres sites
Type : Micrologiciel - Lights-Out Management
Version : 2.77(17 déc. 2020)
Système(s) d'exploitation : Microsoft Windows Server 2008 Foundation Edition
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 Foundation Edition
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
 
Nom de fichier : cp046021.exe (13 MB)

 

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_2a4f6e276e9d4eac9d3716e50b

 

Upgrade Requirement:
Critical - HPE requires users update to this version immediately.


 

  • Potential vulnerabilities in network stack. Click here to know more about the Security Vulnerabilities.
  • Active directory test may fail during LDAP authentication.
  • Like 2

Partager ce message


Lien à poster
Partager sur d’autres sites
Le 26/12/2020 à 15:10, minos a dit :

Hello, 

 

je viens de faire l'upgrade 6.5 à 6.7

 

image.thumb.png.4863e7eb225033b2520eb5176896b714.png

 

 

Sauf que j 'ai un soucis j 'ai perdu 2 datastores ( mon disque SSD ) :3:  .Je vois que mes datastores montés sur mon NAS.

 

je vois mon SSD depuis le stockage :

 

image.thumb.png.01af906ad446504c1482f2de47df4592.png

 

 

Mes 2 datastores perdus doivent  être ici je présume :

 

image.thumb.png.cba124d2afbece4a60a2d5aa564ec678.png

 

mais comment faire pour les ajouter de nouveau ?

 

mes adaptateurs sont tous Etat inconnu :

 

image.thumb.png.fb7dabf9debc9b1dab9606f53dad0dd2.png

 

 

Avez -vous une idée ?

 

Au passage ...

 

ESXi ....finit..... Vive PROXMOX !!!

Partager ce message


Lien à poster
Partager sur d’autres sites

Bonjour,

 

J'ai suivi la procédure pour migrer mon xpenology en VM avec les RDM etc...

Mon problème est que lorsque je lance la VM Synology Assistant détecte le système mais me propose une nouvelle installation.

J'ai bien tenté de faire suivre les instructions mais après avoir importé le fichier .pat j'ai ce message :

 

image.png.4c233431106e45d978477e336625fe20.png

 

Le message m'a l'air bien clair si je clique je perds toutes mes données.

Je ne comprends pas pourquoi il ne retrouve pas mes données et ne me propose pas de migration.

 

Est-ce que quelqu'un a une idée ?

 

Merci,

Modifié par Dji

Partager ce message


Lien à poster
Partager sur d’autres sites

Pour ceux qui veulent installer très simplement DSM 7 en VM ou en Baremetal voici les loaders

 

Pour la version Baremetal

arpl-1.0-beta3.img.zip

A décompresser et a mettre sur une clef usb

 

Pour ESXI

arpl-1.0-beta3.vmdk-flat.zip

a décompresser et copier sur le datastore

 

A l'invite de commande on tape : menu.sh

 

a.jpg.4bacdb3c2098b6127708a76267b9250f.jpg

 

on va mettre le clavier en azerty en sélectionnant : Choose a key map Puis Update menu pour faire les mises a jours du loader

 

 

c.jpg.bfee44b1e1f9737caa0f9d8205659610.jpg

 

On choisi le model

b.jpg.9a17dfb9cde471f437fe0ff3e83847bd.jpg

 

En fonction de votre CPU il vous sera donné les modèles compatible

 

 

d.jpg.f85ef5d63cc09a4ee67b94f236e595d7.jpg

 

On choisi le build

e.jpg.f5992b6760231c95e76545ceaf9f94f4.jpg

 

on va obtenir ce menu ou l'on choisira ça config 

 

f.jpg.d73f1d07d23f2d949d6ad57748fa9b79.jpg

 

On termine par la compilation du loader Build the loader

il n'y a plus qu'a redemarrer et installer le fichier .pat télécharger sur le site de synology

  • Like 1

Partager ce message


Lien à poster
Partager sur d’autres sites

Merci !

C'est le même bootloader pour les DVA ?

(J'aimerais bien upgrader mon SynoNackup, comme tu as fait pour mes SynoMain & SynoTest - Merci).

Partager ce message


Lien à poster
Partager sur d’autres sites

hello, à l'époque j'ai suivit le forum pour installer esxi 6.5 u1, mais depuis quelques jours il y a quelques soucis avec les failles esxi

 

pouvez-vous me conseiller un tuto pour installer la mise à jour qui corrige le problème ou une version plus récente qui n'a pas cette faille

 

merci ;)

Partager ce message


Lien à poster
Partager sur d’autres sites

Salut
Perso je suis sous esxi 6.7u3 depuis un moment.

Normalement la dernière version pour microserver gen8 c'est esxi 6.5

La 6.7 fonctionne très bien

Il faudrait regarder sur le site hp la dernière Iso disponible

Envoyé de mon BLA-L29 en utilisant Tapatalk

Partager ce message


Lien à poster
Partager sur d’autres sites

nouvelle version pour ILO4

 

2.82
2023-03-02
 

https://support.hpe.com/connect/s/product?language=fr&kmpmoid=1009143853&tab=manualsAndGuides#t=DriversandSoftware&sort=relevancy&layout=table

1.thumb.jpg.e465abcb134e15d1ad7b0dcd4a5fe25c.jpg

 

FILE NAME:    iLO4_282.bin
TITLE:        iLO 4 firmware v2.82

LANGUAGE:  English

DIVISIONS:  Systems

PRODUCTS AFFECTED:
    HPE ProLiant BL660c Gen9 Server Blade
    HPE ProLiant BL460c Gen9 Server Blade
    HPE ProLiant DL580 Gen9 Server   
    HPE ProLiant DL560 Gen9 Server
    HPE ProLiant DL380 Gen9 Server  
    HPE ProLiant DL360 Gen9 Server
    HPE ProLiant DL180 Gen9 Server
    HPE ProLiant DL160 Gen9 Server
    HPE ProLiant DL120 Gen9 Server
    HPE ProLiant DL80 Gen9 Server
    HPE ProLiant DL60 Gen9 Server
    HPE ProLiant DL20 Gen9 Server
    HPE ProLiant ML350 Gen9 Server
    HPE ProLiant ML150 Gen9 Server
    HPE ProLiant ML110 Gen9 Server
    HPE ProLiant ML30 Gen9 Server
    HPE ProLiant XL450 Gen9 Server
    HPE ProLiant XL750f Gen9 Server
    HPE ProLiant XL740f Gen9 Server
    HPE ProLiant XL730f Gen9 Server
    HPE ProLiant XL250a Gen9 Server
    HPE ProLiant XL230a Gen9 Server  
    HPE ProLiant XL230b Gen9 Server
    HPE ProLiant XL190r Gen9 Server    
    HPE ProLiant XL170r Gen9 Server    
    HPE ProLiant WS460c Gen9 Graphics Server Blade
    HPE ProLiant EC200a Server
    HPE Synergy 480 Gen9 Compute Module
    HPE Synergy 620 Gen9 Compute Module
    HPE Synergy 660 Gen9 Compute Module
    HPE Synergy 680 Gen9 Compute Module
    HPE ProLiant BL660c Gen8 Server Blade
    HPE ProLiant BL465c Gen8 Server Blade
    HPE ProLiant BL460c Gen8 Server Blade
    HPE ProLiant BL420c Gen8 Server Blade
    HPE ProLiant DL580 Gen8 Server   
    HPE ProLiant DL560 Gen8 Server
    HPE ProLiant DL385p Gen8 Server   
    HPE ProLiant DL380p Gen8 Server   
    HPE ProLiant DL380e Gen8 Server   
    HPE ProLiant DL360p Gen8 Server   
    HPE ProLiant DL360e Gen8 Server   
    HPE ProLiant DL320e Gen8 v2 Server   
    HPE ProLiant DL320e Gen8 Server   
    HPE ProLiant DL160 Gen8 Server
    HPE ProLiant ML350e Gen8 Server   
    HPE ProLiant ML350p Gen8 Server   
    HPE ProLiant ML310e Gen8 v2 Server
    HPE ProLiant ML310e Gen8 Server
    HPE ProLiant SL4540 Gen8 Server   
    HPE ProLiant SL210t Gen8 Server   
    HPE ProLiant SL270s Gen8 Server   
    HPE ProLiant SL270s Gen8 SE Server   
    HPE ProLiant SL250s Gen8 Server   
    HPE ProLiant SL230s Gen8 Server
    HPE ProLiant XL220a Gen8 Server
    HPE ProLiant MicroServer Gen8   
    HPE ProLiant WS460c Gen8 Graphics Server Blade
    HPE Apollo 4200 Gen9 Server 
    HPE Apollo 4530 Gen9 Configure-to-order Chassis

OPERATING SYSTEM:

    Microsoft Windows Server 2008 *
    Microsoft Windows Server 2012
    Microsoft Windows Server 2012 Essentials
    Microsoft Windows Server 2012 R2
    Microsoft Windows Storage Server 2008
    Microsoft Windows Server 2016
    Microsoft Windows Server 2019
    Red Hat Enterprise Linux 6 (x86, AMD64/EM64T)
    Red Hat Enterprise Linux 7
    Red Hat Enterprise Linux 8
    SUSE Linux Enterprise Server 15
    SUSE Linux Enterprise Server 11 SP4 (x86, AMD64/EM64T)
    SUSE Linux Enterprise Server 12 SP3, 12 SP2
    VMware vSphere 6.7, 6.5 U1, 6.5 U2, 6.0 U3, 7.0

  *Not supported on all platforms, see the OS support list for your platform. http://www.hpe.com/info/OSsupport

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

BUILD DATE:      February 6, 2023
EFFECTIVE DATE:  February 27, 2023


DESCRIPTION:   Firmware for the Hewlett Packard Enterprise
               iLO 4 Management Controller
               
LAST RECOMMENDED OR CRITICAL VERSION: 2.81

PREVIOUS VERSION: 2.81

UPGRADE REQUIREMENTS: RECOMMENDED

FIRMWARE DEPENDENCY:

  Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
  for best performance:  
 
  - RESTful Interface Tool (iLOREST) 4.0.0 or later
  - HPQLOCFG v6.0.0
  - Lights-Out XML Scripting Sample bundle 6.00.0
  - HPONCFG Windows 6.0.0
  - HPONCFG Linux 6.0.0
  - LOCFG v6.00.0 or later
  - HPLOMIG 6.0.0

KNOWN ISSUES:
      - Fibre Channel Ports are displayed with degraded status if they are configured but not attached.

FIXES:
  - Security issues (refer "SECURITY" section)
  - WebServer self signed certificate has an invalid expiry date on re-generation
  - Organizational Unit attribute is not shown as Mandatory for the iLO Redfish REST API
  - Online help has references for direct connect feature
    
ENHANCEMENTS:
  - None

SECURITY:
  For the latest security bulletins and vulnerabilities, please visit:
  https://support.hpe.com/connect/s/securitybulletinlibrary.
 
Security best practices:

  Please refer to the HPE Integrated Lights-Out Security Technology Brief for the latest on security best practices at:
  http://www.hpe.com/support/iLO4_security_en


Feature previews:
    Shared Network Port, port selection: Allows you to choose between port 1 and
    port 2 for Shared Network Port functionality. You can configure this setting
    on the Network > Shared Network Port > General page in the iLO web interface.
    
    NOTE: Not all sideband NICs are supported. In some cases, port 2 might not
    be fully functional.

         NICs that work with port #2 for sideband:
         HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
         HPE FlexFabric 10Gb 2-port 533FLR-T Adapter
         HPE Ethernet 10G 2-port 562FLR-SFP+ ALOM
         HPE Ethernet  10/25G 2-port 640FLR-SFP28 ALOM
         HPE FlexFabric 10Gb 4-port 536FLR-T Adapter
         361i-2port-1GB NIC
         331FLR-4P-1G NIC
         366FLR-4P- 1G NIC
         561FLR-T-2P-10GB NIC
         526FLR-SFP+2P-10GB NIC
         InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter **Port #2 Only
         534FLR-SFP+2P-10GB NIC
         Ethernet 1GB 2-port 330i Adapter
         BCM57810 NetXtreme II 10 GigE (NDIS VBD)
         FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
         Ethernet 10Gb 2P 560FLR-SFP+ Adapter

 

SUPPORT -

1.  iLO 4 firmware updates and utilities are available at:

      http://www.hpe.com/support/iLO4

2. IPv6 network communications - Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                HPQLOCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
                IPMI
                Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support
                Embedded Remote Support (ERS)

 

3. You might encounter a "data inconsistency error" when you use iLO Federation
   Management. This error occurs when an iLO on your network is not
   responding correctly. Use the data on the Multi-System map page to
   troubleshoot data inconsistency errors.

 

DOCUMENTATION -

1.  iLO 4 documentation is available at http://www.hpe.com/support/iLO4.

2.  Check the online help for information about how to use iLO. To access the
    online help, click the question mark icon in the upper right corner of
    any iLO web interface page.

 

HOW TO USE -

1.  Download the iLO 4 Online Firmware Update Component for your
    operating system.

2.  Install the firmware using one of these options:

    a) Run the component on the host to be updated.
       The component will update the iLO 4 firmware and reset the iLO processor.

    b) Extract the firmware from the component. This will place the firmware
       image file, iLo4_yyy.bin (where yyy represents the firmware version), in
       the target directory.  You now have these options:

       i) Login to iLO, navigate to the Update Firmware page, and update the
       i) Login to iLO, navigate to the Update Firmware page, and update the
          firmware from there.

       ii) Use the Lights-Out Configuration Utility (HPQLOCFG) and RIBCL/XML
           scripts to update iLO 4 across the network.

       iii) Use the Online Lights-Out Configuration utility (HPONCFG) and
            RIBCL/XML scripts to update iLO 4 from the supported host OS.

3.  iLO automatically resets after a successful update.
    There is no need to manually reset iLO.

Copyright 2002-2023 Hewlett Packard Enterprise Development, LP

Partager ce message


Lien à poster
Partager sur d’autres sites

×