Qubino ZMNHXD1
3-Phase Smart Meter
Pages produit :
https://qubino.com/products/3-phase-smart-meter/
https://qubino.com/products/3-phase-smart-meter/smart-meter-3phase-tech/
Main terminals (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO)
Contacts capacity: 2.5 ... 16 (25) mm2
Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals (1,2,4,5)
Contact capacity: 1 ... 2.5 mm2
Screws: M3
Max torque: 1.2 Nm
Measuring input:
Type (connection): three phase (4u)
Basic current (Ib): 5 A
Maximum current (Imax): 65 A
Minimum current (Imin): 0.25 A
Starting current: 20 mA
Nominal voltage (Un): 3x230 V/400V
Power consumption at Un: < 8 VA
Nominal frequency (fn): 50 and 60 Hz
Accuracy:
Active energy and power:
Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy:
Standard EN 62053-23: class 2
LED:
Colour: red
Pulse rate: 1000 imp/kWh
LED on: no load indication
Optical communication:
Type: IR - used to control BICOM432-40-IR
Input (16):
Rated voltage: 230 V (± 20%)
Input resistance: 450 kOhm
Safety:
LCD:
Indoor Meter: yes
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 Vrms cat. III
AC voltage test: 4 kV
Installation Category: 300 VRMS Cat. III
Standard: EN 50470
Ambient conditions and EMC:
According standards for indoor active energy Meters.
Temperature and climatic condition according to EN 62052 11
Ambient conditions and Safety:
According standards for indoor active energy Meters.
Temperature and climatic condition according to EN 62052 11
Dust/water protection: IP50
Operating temperature: -25 ... 55°C
Storage temperature: -40 ... 70°C
Enclosure material: self-extinguish
complying UL94 V
Indoor Meter: yes
Degree of pollution: 2
AC voltage test: 4 kV
Standard: EN 50470
Distance: up to 30 m indoors (depending on building materials)
Weight (with packaging): 220g (240g)
Frequency range: 868.4 MHz*, Z-Wave
Installation: DIN rail 35mm
Dimensions (W x H x D): 53,6 x 84 x 65mm
Package dimensions (W x H x D): 58 x 84 x 95mm
Colour RAL 7035
-------------------------------------------------------------------------------------------------------------------------------------------------
Bonjour à tous,
Je suis en train de refaire (exclure/inclure les modules) l'intégralité de mon réseau domotique maintenant que j'ai ma HC3.
Je rencontre quelques petites bizarrerie que j'essaye de comprendre au fur et à mesure.
J'ouvre se post/sujet car je n'ai rien trouvé concernant la HC3 & le module Qubino Smart Meter 3-Phase
Je l'ai inclus il y a quelques jours mais je n'ai pas de retour des valeurs sur tout les points alors que je les avait sur ma HC2 et se que quelqu'un a déjà eux se problème ???
Voici une capture d'écran ou vous constaterez que je n'ai des retours uniquement sur les Watts ....
Merci à tous d'être ici