Rechercher dans la communauté

Version 4.511 BETA New improvements: Added support for Fakro ZWS12. Added support for Remotec ZXT-600. Added support for Heiman/Zipato HS1CG Gas Sensor. Added the popup notification while trying to disable Remote Access with active installer access. Added the button for rebooting in recovery mode. Improved communication security of plugins. Resolved issues: System hangs on starting services. Unable to reboot or turn off the gateway using a scene. Unable to transfer configuration via id.cloud.fibaro.com between gateways linked to Fibaro ID account. Gateway does not start after restoring cloud backup. 'API: Host not found' error. Incorrect icon for Roller Shutter which controls a garage gateway. Alarm events disappear after refreshing the page. No data in LAN Settings after rebooting. Lists of scenes and rooms do not update correctly. Scene based on weather does not start. Removed dashboard. Other minor fixes.

Version 4.510 This update introduces new and optimized operating system, modified file structure and the following brand new features: - Update package downloaded in the background, without locking the interface. - Creating encrypted local backup that can be downloaded to your hard drive and later restored. - Creating encrypted backups, stored in Fibaro cloud that can be later restored. - Customized icons included to backup. - Restoring backup with full rollback (restores also software version) or with current software version (up from 4.503). Backups created so far become incompatible. - System configuration transfer between gateways linked to the same Fibaro ID account via id.cloud.fibaro.com. Changes related to GDPR: - Displaying the number of remaining attempts to log in. - Blocking the possiblity to log in for 30 minutes after 5 unsuccessful attempts from a given IP address. - Displaying the value of time remaining to unlock the ability to log in. - E-mail notification sent to admin after 5 unsuccessful attempts to log in. - E-mail message sent every 90 days that recommends changing your password. Other improvements: - New, more reliable file structure. - No need to use the recovery pendrive. - Optimized software update process minimizing the risk of potential errors during system update. - Easier and more intuitive setting of advanced parameters. - New user interface of recovery system. - Information about scenes used by a given device available in its configuration. - Notification after successful update recommending to create a backup if there is no compatible backup. - Possibility to disable creating auto-backup in Fibaro cloud before performing update. - Indication of exceeding 90% of cloud backup storage. - Compatibility with cameras connecting through https protocol. - Caching icons in the browser cache for faster loading. - Adjustable brightness of device LEDs in Configuration - General. - Added new plugins: Samsung Smart Appliances, Philips TV, Cool Master, Power View (Hunter Douglas), Initial State. - Added support for FIBARO Wall Plug UK - type G. - Added Kuwait time zone. Resolved issues: - Losing the synchronization of the set time. - No variables list while creating a virtual device. - No icon change lock via the remote access. - Switching a number of grouped devices results in 503 error. - Non-admin users cannot modify their own e-mail address and password. - Number of devices counted in a particular backup contains all endpoints, active plugins and users instead of devices only. - Notification suggesting replacing the battery of FIBARO The Heat Controller instead of charging. - Scene based on time condition results in 'timer handler failed with error' message. - No possibility to set time manually. - No power consumption bars in 'Top 5' section. - No content for notification recommending to create a backup. - Error while changing configuration from DHCP to Static IP. - No possibility to disable the remote access in LAN configuration. - LEDs do not indicate the available update. - System hangs on starting services after update or backup procedure. - Notification about disabled remote support does not link to LAN configuration. - Possibility to disable scene by the user with no sufficient rights. - Incorrect Z-Wave region set in some cases after performing update for chip versions other than EU. - Unable to activate remote support. - 'Invalid access token' error while trying to connect with Samsung Smart Appliances plugin. - Unable to add device with Philips TV plugin. - Onkyo plugin uses a lot of resources. - Other minor fixes.

Software Changes List 4.160: Version 4.160 New improvements: - Improved Fibaro Heat Controller support - Improved secure communication - Improved PIN synchronization stability for Z-Wave locks - Added default temperature sets to heating panel - Update of devices' states after Home Center start - Protection against incorrect Power and Energy values for Fibaro devices - Improved notification center for users without admin privilege - Improved installed plugins view - Possibility to change size of edit window in LUA scenes - Updated Wall Plug US icons - Frequency information when adding new devices to Home Center - Improved control of third party devices included in heating panel zone - manual setting on any thermostat will exclude it from a heating panel schedule for two hours Resolved issues: - Problem with generating Magic scenes for alarm conditions - Problem with saving Blocks scenes - Problem with refreshing interactive push scenes - Inability to set association in Home Center added as Secondary controller - Problem with displaying devices' parameters - Problem with controlling temperature sets in heat schedules after time passes 00:00 - Problem with displaying rooms when Hikvision camera plugin was added to system in Edge browser - Problem with displaying grouped devices - Problem with refreshing Slider value for Sonos plugin - Wrong notification about incorrect mesh network reconfiguration - Problem with low battery level notification - Problem with not disappearing notification about energy measurement in dashboard - Deleted wrong resources from Fibaro Docs - Problem with sending multi-line interactive push messages - Problem with undefined parameters of Aeotec Siren Gen5 - Problem with incorrect translations for Fibaro Intercom - Problem with 503 error after system startup - Problem with operating some devices from the heating panel - Problem with displaying LUA and Block scenes when using devices included in security mode - Problem with displaying devices' parameters - Problem with "Arming delay" and "Disarming delay" functions in Fibaro Alarm - Problem with Zipato RFID Reader reports handling - Problem with block scenes using delay - Problem with a delay function used as a condition in block scenes - No device grouping section for Fibaro RGBW Controller - Minor graphic fixes - Minor system fixe

Beta software changes list 4.152: Version 4.152 Beta New improvements: - Improved Fibaro Heat Controller support - Improved control of third party devices included in heating panel zone - manual setting on any thermostat will exclude it from a heating panel schedule for two hours Resolved issues: - Problem with sending multi-line interactive push messages - Problem with undefined parameters of Aeotec Siren Gen5 - Problem with incorrect translations for Fibaro Intercom - Problem with 503 error after system startup - Problem with operating some devices from the heating panel - Problem with displaying LUA and Block scenes when using devices included in security mode - Minor graphic fixes

HC2 & HCL - 4.151 - BETA - 07/12/2017 Beta software changes list 4.151: Version 4.151 Beta New improvements: - Improved Fibaro Heat Controller support - Improved secure communication - Improved PIN synchronization stability for Z- Wave locks - Added default temperature sets to heating panel - Update of devices' states after Home Center start - Protection against incorrect Power and Energy values for Fibaro devices - Improved notification center for users without admin privilege - Improved installed plugins view - Possibility to change size of edit window in LUA scenes - Updated Wall Plug US icons - Frequency information when adding new devices to Home Center Resolved issues: - Problem with generating Magic scenes for alarm conditions - Problem with saving Blocks scenes - Problem with refreshing interactive push scenes - Inability to set association in Home Center added as Secondary controller - Problem with displaying devices' parameters - Problem with controlling temperature sets in heat schedules after time passes 00:00 - Problem with displaying rooms when Hikvision camera plugin was added to system in Edge browser - Problem with displaying grouped devices - Problem with refreshing Slider value for Sonos plugin - Wrong notification about incorrect mesh network reconfiguration - Problem with low battery level notification - Problem with not disappearing notification about energy measurement in dashboard - Deleted wrong resources from Fibaro Docs - Minor graphic fixes

Bonjour à tous, Même style que la 4.132 beta

Bonjour, J'ai fait la mise à jour du firmware en 4.130 qui s'est bien passée même si un peu longue ... Quand je vais sur mon panneau de sauvegarde, voici ce qui est indiqué : "Could not start the update due to the lack of disk space on recovery drive. Remove unnecessary backups to get more space and try again." Et mon checksum est corrompu ... Sinon la box fonctionne correctement a priori pas de soucis... ? C'est grave docteur ? Si quelqu'un à une solution pour remettre ça en ordre sans tout planter, je suis preneur ! Merci par avance !

BETA 4.122 Version 4.122 Beta New improvements: - Refurbished layout of Heating Panel - UI improvements in heating zones list, possibility to copy the daily schedule, possibility to set schedule intervals for all week. - Extended door lock support - added support for the PIN codes in Block Scenes and Magic Scenes. Resolved issues: - Error in using the AEON Labs LED Bulb. - Stella Z - template does not show the temperature end point. - Minor graphic fixes. @MAM78, correction du panneau de chauffage, clique :-)

HC2 - Version 4.121 - Beta- 27/04/2017 Liste des modifications de la version beta 4.121: Version 4.121 Beta New improvements: - Refurbished layout of Heating Panel - simplified process of creating heating schedule. - Extended door lock support - support for the PIN codes available from the device. Resolved issues: - Error after editing location in Location Panel. - Error 503 during moving section. - Minor graphic fixes.

Bonjour, Suite mise à jour après achat d'une HCL, plus d’accès possible en IP à la box. Comment initialiser la box version usine ? Michel

Beta software changes list 4.112: Version 4.112 Beta This update features migration process from version 3.600, reconfiguring every device, adjusting them for changes which took place in the system. This will assure a possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please, refer to the message that appears in the interface and Notification Center for further instructions after finishing upgrade. Important! Updating from version 3.600 may take up to 30 minutes. Do not restart controller during update process. Resolved issues: - Incorrect redirect after an update. - It is not possible to create scene with weather or weather plugins as a condition. - Information about the status change of some devices (e.g. Wall Plug) are not displayed in the event panel. - Devices with unticked "Show measurement of energy consumption" option are counted in the global power measurement. - You cannot edit the location points in the location panel. - No possibility of a simultaneous change in many blockade parameters of KeyFob. - Central Scene Events are sent twice. - Sending an unsupported action to a device can cause a crash of the Z-Wave service. New devices support: - Eurotronics Comet Z. - Eurotronics Stella Z. - Philio Technology Corp Multisensor PST02. - Philio Technology Corp PAN06. - Domitech LLC Smart LED Retrofit Kit ZE27EU. Other improvements: - Verification of available space in the system - available space is checked before the software update. In case of insufficient space update will not start. The view of system update is now similar to configuration Wizard.

Mise à jour Over-The-Air du firmware des modules Z-Wave Fibaro Procédure Lorsqu'une mise à jour est disponible pour au moins un module, une notification apparait en haut de l'interface de la HC2 (triangle jaune) : En cliquant sur le triangle jaune, la zone de notifications s'ouvre. L'exemple suivant montre qu'un firmware est disponible pour un Motion Sensor : Après avoir cliqué sur le bouton "Go to notification center", on arrive dans le panneau de notification qui nous donne plus de détails sur le (ou les) module(s) pouvant être mis à jour : Après avoir cliqué sur le bouton "Afficher", on arrive sur l'onglet des propriétés avancées du module. En descendant un peu plus bas, on voit la section concernant la mise à jour du module. Dans l'exemple ci-dessous, la mise à jour 2.8 est disponible : Après avoir cliqué sur le bouton "Start", une fenêtre popup s'ouvre alors. Il faut lire et faire défiler le texte, puis cliquer sur la case à cocher "Do you want to proceed with the software update", et enfin cliquer sur le bouton "Installer la mise à jour" : Si le module est sur pile, ce qui est le cas du Motion Sensor, la fenêtre principale de la HC2 indique qu'elle est en attente du réveil du module : Il faut alors aller le chercher et le rapprocher de la HC2 (quelques mètres devraient suffire, l'objectif étant d'être à portée directe de l'antenne de la box sans passer par le routage du réseau Z-Wave). Ouvrir ensuite le module, et effectuer un triple-clic sur le petit bouton pour le réveiller. Le téléchargement du firmware commence alors : Un certain nombre d'informations apparaissent dans l'interface de la HC2, permettant de suivre le bon déroulement de la procédure : Si la zone de mise à jour indique "Waiting for communication", c'est qu'il faut réveiller à nouveau le module. Il peut être nécessaire de réveiller au moins 3 fois le Motion Sensor durant toute la procédure. Evidemment, un module sur secteur n'a pas besoin d'être réveillé, car il écoute tout le temps le réseau Z-Wave. Lorsque l'opération est terminée, le statut indique "Success"' : La même information est reportée dans la zone de notification : Dans les propriétés du module, la nouvelle version 2.8 est indiquée : Messages d'erreurs possibles Statut : Fail - Battery level too low to perform the update. Replace the battery and try again. Pour un module sur pile, il faut remplacer la pile. Pour un module sur secteur, il n'y a pas de pile à changer, il s'agit probablement d'une mauvaise configuration du module dans la base de données de la HC2. Il faut alors effectuer une reconfiguration douce du module : Dans la fenêtre popup, confirmer le lancement de la procédure de reconfiguraiton douce en cliquant sur le bouton "Je sais ce que je suis en train de faire. Continuer" : Patienter durant la reconfiguration douce qui doit durer quelques secondes, jusqu'à l'apparition du message "Device configuration finished" : Il faut ensuite retourner dans la zone de mise à jour du module, et cliquer sur le bouton "Check" : La mise à jour peut ensuite être lancée normalement. Ci-dessous la mise à jour d'un Wall Plug, qui est sur secteur et n'a donc pas besoin d'être réveillé. La mise à jour se déroule toute seule, sans intervention de l'utilisateur, pendant une durée d'environ 5 minutes : Statut : Fail - Frame request error. Try again. Relancer simplement la procédure de mise à jour immédiatement. Si cela ne passe toujours pas, il faudra envisager de déplacer le module afin de le rapprocher de la box. Changelog Motion Sensor FGMS-001 2.8 [fix] Fixed problem with too many reports from lux meter. [fix] Multichannel Associations are now sent even when there is no single node set in association group. 2.7 [fix] Removed error with wrong multichannel association frames. [fix] Corrected tamper notifications in seismograph mode. [fix] Improved range test. [fix] Minor Z-wave improvements. 2.6 [fix] Corrected error with removing associations. Motion Sensor FGMS-001+ 3.4 Higher redundancy for PIR Sensor reading for reducing false positive notifications. Other minor improvements. Wall Plug FGWPx101 25.25 [fix] Minor Z-wave changes. 24.24 [fix] Energy measurements storing fix. [fix] Minor Z-wave changes. Dimmer FGD-212 3.5 [change] Added parameter 38 - reduction of automatic level control in 2-way connection mode. Changing this parameter allows to impair the Ripple Control impact on output brightness. [fix] Improved dimming with Ripple Control Signaling in 3-way connection mode. [fix] Improved rejection of short voltage interruptions causing spontaneous maximum brightening. [fix] Fixed Z-Wave Multilevel:StartLevelChange with parameter (direction = down). Dimming now stops at Value = 1. 3.4 [fix] Reduction of light flickering/turning off for OVERCURRENT condition. [fix] Bistable button empty click fixed. [fix] StartMultilevelSwitch sent without dimming time now takes manual dimming time parameter (compatibility with Dimmer 1). [fix] Double state report for endpoint 2. [change] Reduction of the maximum associated devices for every association group to 8 (single/multi/mixed). [change] Associations in 3-way switch mode for S2 are now sent in 4/5th group. Oher small corrections. 3.3 [fix] Reduction of stroboscopic-effect for dimmers affected with Ripple Control signal. [fix] Correction of voltage sag detector. Other small corrections. RGBW Controler FGRGB-101 27.27 Added a configuration parameter that disables associations to other devices. The device behavior was improved while receiving next turnOn command during the color transitions. Version 27.27 fully supported from HC2/HCL 4.550. 26.25 [change] Compiled with new version of SDK. [fix] Resolved problem with false associations. RGBW Controler 2 FGRGBW-442 5.1 Changed external switch behavior when the brightness is set to 0%. Other small fixes. Vanne Thermostatique Fibaro FGT-001 4.5 Ajout du paramètre permettant de modifier le comportement du régulateur "Rapide ou Modéré" (dynamique de chauffage), Ajout de rapports de capteur de température interne s’il n’ya pas de capteur de température supplémentaire couplé, Ajout du support pour le montage vertical / horizontal de la tête thermostatique, Erreur fixe de la vanne n'étant pas complètement fermée dans certains cas,  Autres améliorations mineures. Roller Shutter 2 FGR-222 26.26 Improved calibration mechanism - protection against accidental calibration when used with toggle switches. Version 26.26 fully supported from HC2/HCL 4.550. Roller Shutter 3 FGR-223 5.1 Improved calibration and positioning algorithm Improved operation with devices with electronic limit switches Improved operation with devices with ‘soft start’ functionality Default value of parameter 20 (Switch type) changed to 0 (momentary switches) Walli Outlet FGWOE-011 & FGWOF-011 5.1 Overall stability improvments Single & Double Switch 2 FGS-213 & FGS-223 3.4 Improved response to controlling device via buttons connected to S1/S2. Optimized number of status reports being send by the module. 3.3 Fixed inputs issue when bistable switches are used. Synchronization of switching in zero-cross - reducing the possibility of welded relay contacts. SDK updated to 6.51.07. Smart Implant FGBS-222 5.2 DS18B20 temperature sensor support has been improvements to make it more reliable, especially in long wiring cases. Optimized input/output behavior after power reset. Other minor improvements. Support for version 5.2 devices is available from 4.601 Beta for HC2/HCL. 5.1 Initial release

c cool les nouveaux firmware VS app du tablet ou téléphone... + rapide, - de bug, + de fonction, + de compatibilité, mais c'est pas toujours comme ça en vrai... parceque donc... compatibilité X stabilité X RAM ça donne combien ??? ELLE EST SUR QUEL FIRMAWARE VOTRE HCL ?

Salut à tous, Suite au massive #fail des version 4.0.80 et 4.0.81 et surtout le fait que l'api de yahoo a changé. Donc au bout d'un mois, rien, pas de news, pas de fix... Soit ils ont plus de vodka pour payer des gens soit la boite a coulé ? Ou le processus de fabrication du swip est tellement complexe que tous les dev sont punis pour les mettre en boite... Bref...

Mise À Jour Hc2 du 23 et 24 septembre 2015 Nouvelle version beta:4.057 Etes vous sà»r de vouloir lancer la mise à jour avec une version beta ? Les versions beta ne sont pas officielles et peuvent contenir des erreurs. Liste des modifications de la version beta 4.057: Version 4.057 Beta WARNING : Beta version is designed for user testing and soon should be released as official. This update introduces whole new migration process from version 3.600, featuring configuration for every device, adjusting it for changes which took place in the system. This will assure possibly smooth transition and continuous operation, allowing each device to work with old settings until reconfiguration is done. Please refer to message that appears in interface and Notification Center after finishing upgrade for further instructions. Important! Updating from version 3.600 may take longer than usual, up to 30 minutes, please do not restart controller during update process. Resolved issues: - #0003502 Aeon (4 in 1) Humidity Sensor - humidity now updates correctly - Devices no longer show up as "Not configured" after controller reboot - Values in Seismometer Mode in Motion Sensor v2.7 are now reported correctly - Logitech Harmony plug-in behaviour is adjusted to recent changes in Logitech's API - PTZ cameras movement can now be controlled as plug-in with mobile devices - Drop-down lists on Firefox version 40 and above are now fully functional - Devices with multiple endpoint are now building correctly even without templates - Minor UI bugs fixes Other improvements: - UI was optimised, increasing interface performance significantly - Following devices received generic templates that cover devices in various versions: - Aeon Minimote - Aeon Micro Smart Energy - Aeon Home Energy Meter - Aeon Smart Energy Switch - Aeon Dimmer - Aeon Door Window Sensor - Aeon Z Wave Multi Sensor - Aeon Key Fob - Aeon Siren - Aeon Recessed Door Sensor - Aeon On Off Switch - Aeon Smart Switch ZW075 - Aeon Smart Strip - Aeon DSD37 - Poly-control Danalock - TKB Home TZ69 Generic templates guarantee compatibility of all devices of given kind, regardless the version, as long as device has the same product ID (which depends on its manufacturer) - Template matching mechanism optimized Known issues: - Inconsistencies in Satel interface - Plugins for TV Sets of various manufacturers may not work with its newer firmware due to restrictions provided by new devices firmware - Breached sensor with Arm Delay causes instant alarm after being armed - Data range selection in event panel doesn't work properly - Devices imported via Gateway Connection may have no icons - Gateway Connection status of dead device between master and slave controller may be different - On mobile clients devices may be visible in different categories than configured - Horstmann Thermostat HRT4-ZW higher battery usage in some cases - Doorlocks some functions may not work properly Important! Due to changes that took place in Logitech API, Harmony plug-in must have been adjusted. Because of manufacturer's restrictions new Harmony plug-in no longer polls Logitech service for changes, meaning, that plug-in values will not be updated when activity state is changed with some other device. This way of operation will maintain until Logitech establishes new way of requesting such data. CHANGES INTRODUCED IN VERSION 4.X: - Drag & Drop for devices and scenes - available on home, devices and rooms screens. Assigning devices to rooms and changing its order is now much easier and faster. - Temperature Panel - allows to see history of temperature changes in rooms and on each device. - Diagnostic Panel - general information about HC working condition like CPU & RAM usage, free space on hard drive. Will be extended in future versions. - Soft Device Reconfiguration - option allows to save settings, parameters and device ID. Thanks to that scenes with reconfigurable device will not require editing. Full reconfiguration will remove and add the device to the Z-Wave network, resulting in the loss of its settings, parameters and change the device ID.. - Mesh Network Reconfiguration - available on Configuration -> Z-Wave Network - New Z-Wave engine - redesigned and rewritten from the scratch. Now is faster and has better support for devices. - Z-Wave Door Locks support - controlling and PIN settings. - Thermostats - extended controlling for thermostats from manufacturers like: Honeywell, Trane Corporation. - Extended tamper for sensors - exclusive information for motion detection and violation of sensors. - Fibaro Smoke Sensor extended support - level of smoke and gap to alarm level is reported and visible on charts. Sensitivity level is now easier to set. - Fibro Motion Sensor new device - when seismometer mode is turned on new device reporting tremors is available. Charts for temperature and illuminance. Additionally information about sensor violation. - Device hiding - device that is not in use can be hide without removing it. - Device deactivation - deactivated device is visible in UI but can't be controlled. - Multithreading added for HC (server and z-wave) - now engines work much faster. - Event panel moved - for better usability now is available in menu on right side of screen. - Pre-Update Confirmation - installing update will prompt user additional confirmation. - Added support for American English (EN-US) - User rights management - moved to Configuration. - Recovery Memory Health - can be checked on Backup & Recovery - Backups has information about compatibility with current HC version - Block scenes improvements - for device only available actions are visible, scene activation block added and logical conditions grouping using brackets. - Lua Scenes - updated tool-tips for devices. - Rest API Active Documentation - documentation and ability to test REST API requests, access at HOME_CENTER_IP/docs Plugins: - Plugins are grouped in categories: Safety, Cameras, Climate, Multimedia, Others - Plugins search - Network devices search via ARP Plugins category Safety: - DSC Alarm - for DSC Alarms, - Helios Basic - integration using Basic license, - Helios Gold - integration using Gold license - Mobotix - for Mobotix videophone, - Satel Alarm - for SATEL - Modular Alarm Plugins category Cameras - more than 130 devices from various manufacturers Plugin category Climate - Carrier Furance - WS Davis Vantage - Nest - plugin for well-known thermostat - Netatmo - plugin for thermostat and weather station from netatmo Plugins category Multimedia - LG Bluray - LG TV* - NC + mediabox - XBMC Remote Control - Denon Amplifier - LG Bluray - Onkyo Amplifier - Philips Bluray - Pioneer Amplifier - Samsung TV* - Sonos - Sony Bluray - Sony TV* - Logitech Harmony * some TV Sets firmware version may not be supported Plugins category Other - Philips Hue - Wake on LAN - Planika Fireplace Other changes, many other improvements to the system